Description
Details
OUTLINE
UNDERBITE
UnderBite edges re-distribute a rider’s weight in such a way that it enhances turning ease and edge hold. Creating divots inward at the binding area reduces and disrupts the surface area of the edge that has contact with the snow while the board is turning. This increases the edge pressure by distributing your weight/energy in the areas where you need it - from the binding out, and through the center of the board where the carving arc is taking place. This segmentation of the sidecut into 3 key zones focuses your body weight onto areas that initiate, hold and release turns.
CORE
POPLAR/PAULOWNIA/BAMBOO + SLAMBACKS
Creating a lighter, more responsive core than the Full Poplar. The Poplar + Bamboo uses the same durable core, lightens it up by replacing 30% of the Poplar with Paulownia and then inserts two bamboo stringers down the full length for added pop and response
BASE PROFILE
CAMBER
BASE MATERIALS
SINTERED TRUE
Just like it says. Pellets or course powder is pressed until it forms a solid. There are several suppliers for our entire industry and they each have different codes for them, depending on the color and transparency. These codes can make it seem like you’re getting many different kinds and grades of sintered but they’re all pretty much the same as far as you and I will ever tell. True Sintered is harder and more expensive than extruded and it can be faster for those that ride aggressively fast. But to do that, it needs to be waxed and prepared for local conditions.
BASIC UN..INC. RDM SPECS
Board Length (cm) | 149 | 152 | 156W | 158 | 159W | 161 |
---|---|---|---|---|---|---|
Surface Area (dm2) | 38,3 | 39,4 | 41,8 | 41,5 | 42,9 | 42,5 |
Tip Length (cm) | 20,5 | 21 | 21,3 | 21,5 | 22 | 22,5 |
Tail Length (cm) | 20,5 | 21 | 21,3 | 21,5 | 22 | 22,5 |
Effective Edge Length (cm) | 113 | 115 | 118,5 | 120 | 120 | 122 |
Contact Length (cm) | 108 | 110 | 113,5 | 115 | 115 | 116 |
Waist Width (cm) | 24,8 | 25 | 25,9 | 25,3 | 26,1 | 25,4 |
Front Foot Width (cm) | 25,5 | 25,7 | 26,7 | 26,1 | 26,9 | 26,3 |
Rear Foot Width (cm) | 25,5 | 25,7 | 26,7 | 26,1 | 26,9 | 26,3 |
Tip Width (cm) | 29,1 | 29,4 | 30,3 | 29,8 | 30,6 | 29,9 |
Tail Width (cm) | 29,1 | 29,4 | 30,3 | 29,8 | 30,6 | 29,9 |
Taper (cm) | 0 | 0 | 0 | 0 | 0 | 0 |
Rocker / Camber (mm) | C0.4 | C0.4 | C0.4 | C0.6 | R0.4-C0.4-R0.4 | R0.4-C0.4-R0.4 |
Sidecut Radius (m) | 7.7 - 7 - 7.7 | 7.9 - 7.2 - 7,9 | 8.2 - 7.5 - 8.2 | 8.3 - 7.6 - 8.3 | 8.3 - 7.6 - 8.3 | 8.5 - 7.8 - 8.5 |
Ref. Point (cm) | 52,1 | 53,3 | 57,2 | 57,2 | 58,4 | 59,7 |
Ref. Point (in) | 20,5 | 21 | 22,5 | 22,5 | 23 | 23,5 |
Ref. Stance Setback (cm) | 0 | 0 | 0 | 0 | 0 | 0 |
Min Ref. Stance Width (cm) | 48,1 | 49,3 | 53,2 | 53,2 | 54,4 | 55,7 |
Min Ref. Stance Width (in) | 18,9 | 19,4 | 20,9 | 20,9 | 21,4 | 21,9 |
Max Ref. Stance Width (cm) | 56,1 | 57,3 | 61,2 | 61,2 | 62,4 | 63,7 |
Max Ref. Stance Width (in) | 22,1 | 22,6 | 24.janv | 24,1 | 24,6 | 25,1 |
Rider Weight (lbs) | 110-160 | 120-170 | 150-200 | 160-210 | 160-210 | 180-220+ |
Rider Weight (kg) | 50-72 | 54-77 | 68-90 | 72-95 | 72-95 | 82-99+ |